Home Products metric drill bushings

Metric Headed Liner Bushings

http://www.bonehamusa.com/wp-content/uploads/2013/01/Boneham-Product-Photographs-042-wpcf_400x266.jpg

Key Features:

  • Metric Bushings
  • OD Ground to Press Fit Size
  • Special Sizes Available
  • Nitralloy (Nitrided) Bushings Available
  • Tight Tolerances, Heat-treated and Ground Finish
  • Available in US and ISO (UK) tolerances
WHEN ORDERING STATE: Quantity, Symbol, Bore Size and whether its for a Drill or Reamer

Description:

Metric Headed Liner Bushings

The shouldered, or headeded liner bushing: can be with countersunk to a flush position or left proud. Headed liners are used with fixed & slip renewable bushings and are permanently pressed into a drill jig or fixture plate.

This range of drill / jig bushings is similar to the H range. The headed drill bushing type contain a shoulder at the top of the bush to allow greater axial force, so not to slip out the plate, and aids where it is desired, to feed down to a dead stop. The head of the bush also allows it to be pressed into the plate easier and can be left either exposed above the plate surface or counterbored to sit flush. These bushes are denominated by the LH reference. All our drill bushings are hardened and have a ground finish to a press fit size.