Key Features
- Drill Bushings to ANSI Standards
- Diameters from 5/16" to 2-1/4"
- Hardened to 60-65 HRC
- OD Ground Lead for Easy Installation
- ID Radius Improves SF Location
Headless Liner Drill Bushing
WHEN ORDERING PLEASE STATE: Quantity, Symbol followed by the ANSI Code found in the 'Technical Data' tab. Example 6, L-32-22
Headless Liner Bushings L
This range of drill bushings are for use in conjunction with renewable fixed and slip type bushings
The headless liner Drill bushing: is permanently pressed into a drill jig or fixture plate. They provide a highly accurate location sleeve whilst eradicating wear caused by drill bushing replacement on the jig plate.
This range of drill / jig bushings is similar to the P range. This type of drill bushing is normally used for jigs where an economically priced drill bushing is required, or where less space is available on the jig plate. Headless liner bushings are pressed into the plate to achieve a flush surface in conjunction with a simple drilling and reaming operation. Headless drill bushings have less resistance than the headed type when subjected to large axial loads. These bushes are denominated by the L reference. All our drill bushings are hardened and have a ground finish to a press fit size.
The BONEHAM bushing range represent the highest standard of quality and are available through our comprehensive distributor network.